Paveroc FC302080-20KG
Paveroc
Paveroc is used for the reinstatement between 15mm and 50mm thick of areas of concrete pavements and floors up to 18sq.metres. The rapid strength gain of Paveroc will ensure that down-time is significantly reduced. It may be used internally and externally.
Typical Applications
- Floor, pavement or joint concrete repairs, large area repair up to 18sq. metres, trowel application, requiring trafficability in 16 hours, where section depth is between 15-50mm
Advantages
- Rapid strength gain - will generally accept pedestrian traffic at 16 hours
- High strength, abrasion and weather resistance
- Single component product eliminates site batching and requires only the site addition of clean water
- Excellent bond to the concrete substrate
- Shrinkage compensated
- Contains no chloride admixtures
- 28 day Strength : 55MPa
- Abrasion resistance : High
- Application : Trowel
- Chemical resistance : Medium
- Full cure @ 20°C : 7 days
- Light traffic : 16 hours
- Service temperature range : 10°C-60°C
- Suitable for use with Galvashield anodes? : No
- Trowel Build / Depth : 15-50mm deep
- Vehicle traffic @ 20°C : 24 hours
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
