Nitoseal SC820
Nitoseal SC820
Nitoseal SC820 is a low modulus, self-smoothing, one component silicone joint sealant with Roadseal® technology.
Nitoseal SC820 is used for sealing sawn abutment joints between concrete and asphalt roads and pavements.
Typical Applications
- Sealing joints between concrete and asphalt in roads
- Other pavements
Advantages
- Ready to use
- No mixing required
- Fast rate of cure
- Excellent adhesion to clean dry concrete and sawn asphalt
- Excellent weathering - UV and ozone resistant
- Dispensed from a bulk container by hand or air powered pump
- Large joint movement accommodation
- Application Type (Gun/Pour) : Gun or dispensed from a bulk container
- Chemical Resistance to spillage : Resistant to dilute acids and alkalis. Not resistant to organic solvents
- Cure rate : Minimum depth of 7mm
- Full cure : 10 +/- 2
- Joint Movement Capability : Plus 100% - minus 50%
- Number of Components : One
- Service temperature : Minus 50°C - 150°C
- Tack Free Time : 45 - 60 minutes @ 23°C
- Tooling Time : 20 minutes @ 23°C
Enter dimensions of your application to calculate the volume and pack quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
