Nitoseal SC600
Nitoseal SC600
Nitoseal SC600 is a one part, gun applied joint sealant designed for sealing joints exposed to aggressive chemical environments. Nitoseal SC600 is resistant to attack from most of the aggressive chemicals used in the food, mining and chemical processing industries. Complies to AS4020:2018
- Overview
- Key Properties
- Test Certificates
- Spec Clause
- Case Studies
- Detail Drawing
- Brochures
- Product Calculator
Typical Applications
- Sealing joints in chemically acidic and alkali environments as well as biological environments such as water and wastewater
Advantages
- One component sealant - ready to use
- Fast rate of cure - reduced back to service times
- UV resistant - long life weathering resistance
- Highly resistant to biological attack such as sewers
- Highly resistant to a wide range of chemicals including strong acids and alkalis
- Highly resistant to pool chlorine, salt water chlorination and ozone treatment
- Complies to AS/NZS 4020:2018 Products in Contact with Potable Water
- Application Type (Gun/Pour) : Gun
- Chemical Resistance to spillage : Highly resistant to biological attack such as sewers, highly resistant to a wide range of chemicals including, strong acids and alkalis, highly resistant to pool chlorine, salt water chlorination and ozone treatment
- Cure Time (Approximately) : 3mm in 24 hours, 1mm / day @ 25°C / 65% RH
- Form : 8mm to 50 mm wide
- Hardness Shore 'A' : 32 +/- 5
- Number of Components : One
- Service temperature : Minus 50°C - 150°C
- Standards compliance / conforms to : Complies to AS/NZS 4020:2018 products in contact with Potable Water
- Tooling Time : 20 minutes @ 25°C 65% RH
- Tooling time : +/- F5625% butt joints (total 50%)
Nitoseal PU400/SC600-Supercast-Formed Contraction Joint Detail
Nitoseal PU400/SC600-Supercast-Floor Expansion Joint Detail
Nitoseal PU400/SC600-Supercast-Formed Partial Contraction Joint
Nitoseal PU400/SC600-Roof Construction Joint Detail
Nitoseal PU400/SC600-Wall Expansion Joint Detail
Nitoseal PU400/SC600-Expoband F-Roof Expansion Joint Detail
Nitoseal PU400/SC600-Supercast-Floor Recessed Wall Detail
Nitoseal PU400/SC600-Hydrotite-Pipe Through Wall Detail
Nitoseal PU400SC600-Supercast-Floor Kicker to Wall Waterstop Detail
Enter dimensions of your application to calculate the volume and pack quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
