Nitoseal PU400 FC920121-600ML

Nitoseal PU400 FC920121-600ML
  • Nitoseal PU400 FC920121-600ML

Nitoseal PU400

Nitoseal PU400 is a medium modulus elastomeric polyurethane joint sealant/adhesive forms a waterproof and durable seal, which makes it ideal for exterior applications such as sealing joints and bonding between most construction materials, where a high bond strength and abrasion resistance is required. Complies to AS4020:2018

Typical Applications

  • Sealing moving or static joints in applications where high strength and abrasion resistance is required

Advantages

  • Trafficable floor joints
  • Metal or concrete water retaining structures
  • Assembly of metal framed buildings
  • Cover plates and covings
  • Bolted lap joints
  • Sealing pipe penetrations in walls and floors
  • Suitable for use in contact with drinking water
  • Cure Time : 24hours to 3mm @50% @23°C
  • Hardness Shore 'A' : 40
  • Joint Movement Capability : +/- 12.5% (total 25%)
  • Joint Size : 15mm to 35mm
  • Modulus @ 100% : 030 - 040 MPa
  • Tack Free Time : 40 minutes (+/-10 mins) at 23°C, 50% RH

Enter dimensions of your application to calculate the volume and pack quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

Overview

Typical Applications

  • Sealing moving or static joints in applications where high strength and abrasion resistance is required

Advantages

  • Trafficable floor joints
  • Metal or concrete water retaining structures
  • Assembly of metal framed buildings
  • Cover plates and covings
  • Bolted lap joints
  • Sealing pipe penetrations in walls and floors
  • Suitable for use in contact with drinking water

Key Properties

  • Cure Time : 24hours to 3mm @50% @23°C
  • Hardness Shore 'A' : 40
  • Joint Movement Capability : +/- 12.5% (total 25%)
  • Joint Size : 15mm to 35mm
  • Modulus @ 100% : 030 - 040 MPa
  • Tack Free Time : 40 minutes (+/-10 mins) at 23°C, 50% RH

Test Certificates

Spec Clause

Detail Drawing

Fact Sheet

Brochures

Product Calculator

Enter dimensions of your application to calculate the volume and pack quantity you will need.

Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.

Technical Data Sheet

Nitoseal PU400 TDS

Safety Data Sheet

Nitoseal PU400 SDS