Nitoproof 810 FC000608-15L

Nitoproof 810 FC000608-15L
  • Nitoproof 810 FC000608-15L

Nitoproof 810

Nitoproof 810 is a water based polyurethane single component membrane designed for a wide range of waterproofing applications in the built environment. Nitoproof 810 is an alternative to solvent based and moisture curing polyurethane membranes.
Complies with AS/NZS 4654.1:2012

Typical Applications

  • Suitable for internal and external wet areas
  • Enabling the direct fix of ceramic tiles
  • Screeds
  • Renders over the dried membrane using Nitotile Plus polymer modified cement based tile adhesive

Advantages

  • Can be flood tested after 48 hours @ 23°C/50% RH
  • Low VOC
  • Elastomeric and flexible with excellent elastic recovery
  • Will not re-emulsify, once cured. Handles permanently wet conditions
  • Low water absorption
  • Low water vapour transmission properties
  • Excellent adhesion to primed surfaces
  • Compatible bonding properties for tile adhesives (such as Nitotile Flex), screeds and renders
  • Non-flammable and non-hazardous
  • Cure Time (@23°C 50% RH) Unless Otherwise Stated : Touch dry 12 hours. Hard cure 24 hours
  • Elongation : >355%
  • Recoat Time : 4 hours @ 23°C, 50% RH. 6 hours @ 10°C, 50% RH
  • VOC Content : Very low 2 g/l

Overview

Typical Applications

  • Suitable for internal and external wet areas
  • Enabling the direct fix of ceramic tiles
  • Screeds
  • Renders over the dried membrane using Nitotile Plus polymer modified cement based tile adhesive

Advantages

  • Can be flood tested after 48 hours @ 23°C/50% RH
  • Low VOC
  • Elastomeric and flexible with excellent elastic recovery
  • Will not re-emulsify, once cured. Handles permanently wet conditions
  • Low water absorption
  • Low water vapour transmission properties
  • Excellent adhesion to primed surfaces
  • Compatible bonding properties for tile adhesives (such as Nitotile Flex), screeds and renders
  • Non-flammable and non-hazardous

Key Properties

  • Cure Time (@23°C 50% RH) Unless Otherwise Stated : Touch dry 12 hours. Hard cure 24 hours
  • Elongation : >355%
  • Recoat Time : 4 hours @ 23°C, 50% RH. 6 hours @ 10°C, 50% RH
  • VOC Content : Very low 2 g/l

Test Certificates

Application Guides

Spec Clause

Detail Drawing

Brochures

Technical Data Sheet

Nitoproof 810 TDS

Safety Data Sheet

Nitoproof 810 SDS