Construction Grout FC501000-20KG
Construction Grout
Construction Grout is a general purpose shrinkage compensated (Class A) cementitious, flowable or trowellable grout for gap thicknesses from 10 mm up to 100 mm.
Typical Applications
- General site grouting and precast panel erection
Advantages
- Gaseous expansion system compensates for shrinkage
- and settlement in the plastic state
- High ultimate strength and low permeability ensure the
- durability of the hardened grout
- Can be dry packed, rammed, trowelled, poured and pumped
- No metallic iron content to cause staining
- Prepackaged material overcomes potential on-site batching variations
- 28 day strength @ 20°C dependent on consistency (cube samples) : 53-65MPa
- Application method : Dry pack, trowel, pour or pump
- Chemical resistance : Not resistant to acids - use epoxy grouts
- Flexural Strength (modulus of rupture) @ 28 days : 85MPa
- Gap size : 10mm to 100mm
- Indirect tensile strength @ 28 days : 60MPa
- Service temperature : >200°C
- Set time : 7 hours
- Tack free time : 400-600mm
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
